Gear
PCH X / PCH V
The Black Widow Bows PCH X and PCH V models represent a focused refinement of Black Widow's established recurve design, tailored specifically for the traditional bowhunter who prioritizes maneuverability and field utility. These are not general-purpose target bows; their 58-60 inch lengths are a clear indication of their intent: navigating dense cover, hunkering down in a ground blind, or settling into a treestand. While sharing the hallmark Black Widow build quality and custom-order process, th
Topic summary
The Black Widow Bows PCH X and PCH V models represent a focused refinement of Black Widow's established recurve design, tailored specifically for the traditional bowhunter who prioritizes maneuverability and field utility. These are not general-purpose target bows; their 58-60 inch lengths are a clear indication of their intent: navigating dense cover, hunkering down in a ground blind, or settling into a treestand. While sharing the hallmark Black Widow build quality and custom-order process, th
Key takeaways
- Compact 14-inch takedown riser design
- Signature forward-handle geometry for torque resistance
- Laminated glass and wood limbs reinforced for low-stretch strings
- Available in premium exotic (X) and ironwood (V) wood configurations
- Brass alignment pins with durable limb-bolt attachment
- Compact profile excels in ground blinds and brushy timber
Intended uses
- Ground blind bowhunting
- Dense timber still-hunting
- Moderate-draw traditional hunters
- Treestand deer setups
Verification notes
Evidence: expert reviewed. Last verified October 16, 2026.
Editorial take
Built around a compact 14-inch riser, the PCH platform cuts Black Widow's proven recurve geometry down to a maneuverable hunting footprint. Available in lengths from 54 to 60 inches, this three-piece takedown was conceived strictly for tight quarters—crawling through dogwood thickets, wedging into brushy ground blinds, or clearing low-hanging limbs in a climbing stand. Where typical short recurves feel skittish, the PCH relies on heavy, dense handle construction to anchor the shot.
The defining characteristic remains the forward-handle design. By placing the grip pivot ahead of the limb mounting surfaces, the bow behaves like a considerably longer rig, resisting torque and masking slight inconsistencies in form. The X and V designations denote the aesthetic trim: the X showcases premium exotic wood veneers like bocote or figured maple, while the V utilizes dark, rock-solid ironwood or classic laminates. In either spec, high-pressure phenolic accents and reinforced limb tips provide bombproof longevity under hard backcountry use.
Downrange, arrow cast is punchy and quiet, especially when loaded with hunting-weight shafts above nine grains per pound. The trade-off is clear: archers drawing past 29 inches will inevitably experience the steep string angle and pinch inherent to short limbs. For standard-draw bowhunters who demand indestructible build quality and shot stability without dragging a long bow through the woods, it remains a gold standard.
Best for
- Ground blind bowhunting
- Dense timber still-hunting
- Moderate-draw traditional hunters
- Treestand deer setups
Not ideal for
- Steep string angle induces finger pinch for draw lengths over 29 inches
- Noticeably heavier physical mass than minimalist wood recurves
- Custom build pricing demands a substantial up-front investment
Verified specifications
- Key features
- Compact 14-inch takedown riser design
- Signature forward-handle geometry for torque resistance
- Laminated glass and wood limbs reinforced for low-stretch strings
- Available in premium exotic (X) and ironwood (V) wood configurations
- Brass alignment pins with durable limb-bolt attachment
Warranty and repair information: contact the brand directly for the most current terms.
Related
Related skills
Related field guides
Related adventures
Data sources & verification
- Last verified: 10/16/2026


