Reader rating
Rate it and you move it. Community ratings re-rank this product inside its Top 10 list.
Expert-picked, reader-ranked. Our editors choose the products and the launch order; member star ratings move picks up or down over time.
The 120 is the 106's short sibling: a 62 mm short, pointed German carbon steel blade on the same oiled birch handle, sold with a sheath. Morakniv pitches it for fine carving and precise cuts, so it is the Mora to pick for figures, detail work and tighter control. **Highlights** - Short blade gives precise control - Same comfortable birch handle as the 106 - Easy to resharpen carbon steel **Watch-outs** - Too short for fast roughing of big blanks - Carbon steel needs drying after use Research only: Wild10 has not field tested this model. Specs and prices come from the maker or retailer page linked below, checked Nov 2026; outside test results are credited to the outlet that ran them.
Pros
- Short blade gives precise control
- Same comfortable birch handle as the 106
- Easy to resharpen carbon steel
Cons
- Too short for fast roughing of big blanks
- Carbon steel needs drying after use
Best uses
- Detail and figure carving
- Finishing spoons
- Small whittling projects
Specifications
- Blade
- 62 mm German carbon steel
- Handle
- Oiled birch
- Includes
- Sheath
- Price
- $37.99 list per maker, Nov 2026
- Wild10 evidence
- Research only, not field tested
Pricing
We don't publish a price we haven't verified. The retailer links below open the live listing for this exact model.
Best for
Detail and figure carving, Finishing spoons, Small whittling projects
Where to buy the Woodcarving Knife 120 (C)
Prices and stock change often, so check the current Amazon offer before you buy.
Some links are affiliate links. Buying through them supports our testing at no extra cost to you.
The 120 is the 106's short sibling: a 62 mm short, pointed German carbon steel blade on the same oiled birch handle, sold with a sheath. Morakniv pitches it for fine carving and precise cuts, so it is the Mora to pick for figures, detail work and tighter control.
Why it ranks here
It ranks fourth as the detail partner to the 106, and if you only make small pieces it can be your only knife.
Limits and caveats
Maker specs only; Wild10 has not measured edge retention.
How we picked
We started with a long list of carving and whittling knives that people actually buy, cut anything that could not clear our baseline for durability and field performance, then ranked the 10 that were left against the same criteria. Rankings are editorial. No brand pays for placement, and affiliate links never move a pick up or down.
- Real-world durability
- How the material, stitching, or steel holds up after a season of hard use — not how it looks new.
- Performance in bad conditions
- Wind, rain, cold, and grit are the test. Anything that only works on a nice day gets marked down.
- Weight and packability
- Every ounce has to earn its place in the pack, but not at the cost of something that fails in the field.
- Ease of use
- Setup, adjustment, and maintenance with cold hands, in the dark, without the manual.
- Value at its price point
- Compared against the closest competitors in the same tier, not against cheaper gear in a different class.
- Repairability and support
- Field-fixable design, available parts, and a warranty the maker actually honors.
Woodcarving Knife 120 (C) — frequently asked questions
- Is the Woodcarving Knife 120 (C) worth it?
- We rank it #4 in Carving and Whittling Knives. The 120 is the 106's short sibling: a 62 mm short, pointed German carbon steel blade on the same oiled birch handle, sold with a sheath. Morakniv pitches it for fine carving and precise cuts, so it is the Mora to pick for figures, detail work and tighter control.
- What is the Woodcarving Knife 120 (C) best for?
- Best for detail and figure carving, finishing spoons and small whittling projects. Standouts: short blade gives precise control and same comfortable birch handle as the 106.
- What are the downsides of the Woodcarving Knife 120 (C)?
- Too short for fast roughing of big blanks and Carbon steel needs drying after use.
- What are the key specs of the Woodcarving Knife 120 (C)?
- Blade: 62 mm German carbon steel · Handle: Oiled birch · Includes: Sheath · Price: $37.99 list per maker, Nov 2026 · Wild10 evidence: Research only, not field tested
- Why it ranks here?
- It ranks fourth as the detail partner to the 106, and if you only make small pieces it can be your only knife.
- Limits and caveats — what should I know about the Woodcarving Knife 120 (C)?
- Maker specs only; Wild10 has not measured edge retention.
Compare side by side
Put the Woodcarving Knife 120 (C) against any other pick on this list — specs, price, pros, cons and reader ratings.