Reader rating
Rate it and you move it. Community ratings re-rank this product inside its Top 10 list.
Expert-picked, reader-ranked. Our editors choose the products and the launch order; member star ratings move picks up or down over time.
The Pomoca Tour Pro is widely regarded across independent gear outlets as the quintessential all-round climbing skin. It is aimed directly at dedicated touring skiers who want an uncompromising mix of low-effort glide, consistent traction on firm tracks, and dependable adhesive performance through varied temperature swings. It takes the guesswork out of skin selection for traditional winter touring setups. Like its lighter sibling, the Tour Pro employs a 70% mohair and 30% nylon plush. This proportion gives users the fast, effortless sliding properties of natural mohair fiber while retaining the mechanical wear resistance and climbing bite of synthetic nylon. The backing is robust enough to endure repeated transitions and abrasive spring conditions without stretching out of alignment or separating along the edges. Its traditional glue offers reliable stick even on third or fourth laps in biting cold. While the Tour Pro glides exceptionally well, pure nylon models will still hold a slight edge in raw climbing grip on excessively steep or slick skin tracks. At roughly $270, it also represents a notable financial investment, but its dependable day-in, day-out performance justifies the premium for frequent tourers. **Highlights** * 70% mohair and 30% nylon mix provides class-leading glide-to-grip efficiency * Traditional hot-melt glue remains tacky across extreme cold-weather transitions * Durable construction withstands edge contact and multi-season wear * Integrated anti-glopping treatment prevents slush accumulation * Straightforward universal tip and tail attachment hardware **Watch-outs** * Expensive initial retail price * Pure nylon skins offer more absolute traction on bulletproof, steep ascents
Pros
- 70/30 mohair-nylon mix provides exceptional glide without sacrificing wear life
- Traditional hot-melt glue performs consistently across severe temperature swings
- Waterproof backing membrane prevents moisture transfer and plush waterlogging
- Low-profile packability fits easily into touring jacket pockets during laps
Cons
- High upfront retail cost compared to standard synthetic skins
- Delivers less raw mechanical grip on icy, steep tracks than pure nylon
Best uses
- Long-distance backcountry tours
- Multi-lap winter day tours
- Spring ski mountaineering traverses
- All-around human-powered touring
Specifications
- Plush Blend
- 70% mohair, 30% nylon
- Adhesive Type
- Traditional hot-melt glue
- Approximate Price
- Around $270
- Core Category
- All-around backcountry touring
- Tail Attachment
- Adjustable camming tail clip
- Glide Profile
- High-efficiency touring plush
Pricing
We don't publish a price we haven't verified. The retailer links below open the live listing for this exact model.
Best for
Long-distance backcountry tours, Multi-lap winter day tours, Spring ski mountaineering traverses, All-around human-powered touring
Where to buy the Tour Pro
We don't have a direct Amazon listing on file yet — this opens an Amazon search for the exact make and model.
Some links are affiliate links. Buying through them supports our testing at no extra cost to you.
The Pomoca Tour Pro stands as one of the most widely praised climbing skins in modern ski touring, earning high marks from independent outlets like OutdoorGearLab and Switchback Travel. Built with a time-tested 70 percent mohair and 30 percent nylon blend, it is engineered to eliminate the classic dilemma of choosing between effortless glide and durable traction. It targets backcountry skiers who need dependable gear across a full winter of varied mountain conditions. At the center of its reputation is its dependable, traditional hot-melt glue. While many recent market entries experiment with hybrid adhesives that can struggle in extreme cold or after multiple transitions, the Tour Pro adheres firmly without tearing apart your base or demanding superhuman strength to separate. It offers a reassuring stick whether you are setting out at dawn in single-digit temperatures or transitioning for a fourth lap in mixed snow. At roughly $270, this skin sits near the top tier of standard touring accessories in terms of cost. However, the balance of low-drag touring efficiency, manageable packability, and multi-season plush resilience makes it an easy benchmark for serious backcountry travelers.
Intended Backcountry Audience
The Tour Pro is built for dedicated ski tourers who prioritize day-long efficiency over the brute-force climbing traction of fully synthetic skins. It suits skiers undertaking long approaches, undulating ridgelines, and high-mileage tours where excessive skin friction accumulates into leg fatigue. If your typical tour involves multiple laps with repetitive skinning and packing, this model provides the reliable adhesion and low-profile packability required. It is less suited for complete novices who rely exclusively on aggressive uphill grip to compensate for developing skinning technique, or for casual weekenders looking for an entry-level budget setup.
Materials and Plush Architecture
Pomoca builds the Tour Pro around a 70/30 mohair-to-nylon ratio, a formula that has become the gold standard for high-performance mixed plush. Natural mohair fibers provide minimal sliding friction along the direction of travel, allowing the ski to glide forward with noticeably less resistance than pure synthetic alternatives. The 30 percent nylon content reinforces the fibers against mechanical abrasion from ski edges, exposed rock, and coarse crust. Beneath the plush, Pomoca integrates a waterproof membrane that prevents moisture from soaking through the fabric backing into the adhesive layer, significantly reducing glopping and wet-glue failure.
Glide and Grip Dynamics
In real-world skin tracks, the Tour Pro delivers an easy, low-drag stride that shines on flat run-outs and moderate ascents. The glide properties allow users to maintain forward momentum without lifting the ski unnecessarily, preserving energy over thousands of vertical feet. On firm, well-established skin tracks, the grip remains consistent and predictable when proper weighted technique is applied. However, on slick, boilerplate switchbacks or excessively steep pitches, pure nylon skins will hold an edge better. Skiers moving to this blend should expect to rely slightly more on hip alignment and deliberate foot placement.
Adhesive and Transition Reliability
The traditional hot-melt adhesive used on the Tour Pro remains one of its most praised attributes. Unlike temperamental silicone or vacuum-style bases, this glue performs predictably across wide temperature bands, maintaining adherence during bitter midwinter freezes and resisting breakdown in warmer spring slush. Tackiness is balanced: it adheres firmly to ski bases without leaving stubborn residue, yet pulling the skins apart skin-to-skin does not require exhausting effort. With routine maintenance, careful drying, and occasional use of protective sheets for summer storage, the glue layer maintains its integrity over hundreds of transitions.
Trimming and Hardware Integration
Pomoca includes straightforward, reliable attachment hardware designed to accommodate a broad spectrum of ski shapes. The metal tip loop sits flat over modern rockered tips without slipping, while the adjustable tail strap utilizes a low-profile camming clip that secures firmly onto notched or flat ski tails. Trimming the skins to fit sidecuts is generally user-friendly thanks to Pomoca's included cutting tool, which offsets the blade automatically to leave ski edges exposed without requiring you to re-center the skin mid-cut. The resulting fit prevents edge snagging and protects the fabric from premature fraying.
Trade-offs and Market Alternatives
The primary drawback of the Tour Pro is its premium cost, retailing around $270. Skiers on tighter budgets often opt for pure nylon options like the Black Diamond Ascension, which cost less and offer superior mechanical grip on sheer, icy tracks, though they carry a major weight and glide penalty. Compared to ultralight pure mohair race skins, the Tour Pro is slightly bulkier and heavier, sacrificing marginal speed for better durability and grip. For backcountry travelers who want one dependable setup that handles deep winter powder and spring traverses alike, the Tour Pro represents a well-justified middle ground.
How we picked
We started with a long list of climbing skins that people actually buy, cut anything that could not clear our baseline for durability and field performance, then ranked the 10 that were left against the same criteria. Rankings are editorial. No brand pays for placement, and affiliate links never move a pick up or down.
- Backcountry reliability
- How consistently the gear works in cold, wet and stressful conditions.
- Weight for the uphill
- Grams saved on the skin track against downhill performance given up.
- Real-world durability
- How the material, stitching, or steel holds up after a season of hard use — not how it looks new.
- Performance in bad conditions
- Wind, rain, cold, and grit are the test. Anything that only works on a nice day gets marked down.
- Weight and packability
- Every ounce has to earn its place in the pack, but not at the cost of something that fails in the field.
- Ease of use
- Setup, adjustment, and maintenance with cold hands, in the dark, without the manual.
Tour Pro — frequently asked questions
- Is the Tour Pro worth it?
- We rank it #2 in Climbing Skins. The Pomoca Tour Pro is widely regarded across independent gear outlets as the quintessential all-round climbing skin. It is aimed directly at dedicated touring skiers who want an uncompromising mix of low-effort glide, consistent traction on firm tracks, and dependable adhesive performance through varied temperature…
- What is the Tour Pro best for?
- Best for long-distance backcountry tours, multi-lap winter day tours, spring ski mountaineering traverses and all-around human-powered touring. Standouts: 70/30 mohair-nylon mix provides exceptional glide without sacrificing wear life and traditional hot-melt glue performs consistently across severe temperature swings.
- What are the downsides of the Tour Pro?
- High upfront retail cost compared to standard synthetic skins and Delivers less raw mechanical grip on icy, steep tracks than pure nylon.
- What are the key specs of the Tour Pro?
- Plush Blend: 70% mohair, 30% nylon · Adhesive Type: Traditional hot-melt glue · Approximate Price: Around $270 · Core Category: All-around backcountry touring · Tail Attachment: Adjustable camming tail clip
- Intended Backcountry Audience — what should I know about the Tour Pro?
- The Tour Pro is built for dedicated ski tourers who prioritize day-long efficiency over the brute-force climbing traction of fully synthetic skins. It suits skiers undertaking long approaches, undulating ridgelines, and high-mileage tours where excessive skin friction accumulates into leg fatigue.
- Materials and Plush Architecture — what should I know about the Tour Pro?
- Pomoca builds the Tour Pro around a 70/30 mohair-to-nylon ratio, a formula that has become the gold standard for high-performance mixed plush. Natural mohair fibers provide minimal sliding friction along the direction of travel, allowing the ski to glide forward with noticeably less resistance than pure synthetic…
Compare side by side
Put the Tour Pro against any other pick on this list — specs, price, pros, cons and reader ratings.